Filter
Top Products
107
Chapter 7 Menu Operations
5
Press the JOG dial button or the SET button to
change the setting value.
PUSH MENU TO RETURN
USER2
RET
LCD/EVF
USER MAIN
SHOT MARK
REC CHECK
USER1 Y GET
MIX/R
PUSH AF
MID GAIN
HIGH GAIN
0dB
3dB
6dB
9dB
12dB
LOW GAIN
SW MODE
6
To change other settings, repeat steps 4 and 5.
• When you finish, press the MENU button to return
to the function screen.
7
To change other functions, repeat steps 2 to 5.
• To exit the function screen and return to the normal
screen, press the MENU button again.
NOTE
Direct close function
When the MENU button is pressed and held down after making
a menu setting, the setting menu screen closes without first
returning to the previous setting menu.
To quickly change settings (MASTER PED and H PHASE
only)
• Fast UP
Hold down the JOG dial button while turning it upwards
and maintain this position. Or, hold the cursor button ()
pressed.
• Fast DOWN
Hold down the JOG dial button while turning it downwards
and maintain this position. Or, hold the cursor button ()
pressed.
Initializing the Menu Settings
The menu settings contain both the user file settings and
the scene file settings. You can initialize them separately.
To initialize scene files (i.e. all the
settings other than the scene file
settings)
Select INITIAL in USER FILE of the OTHER FUNCTIONS
screen. The current menu settings of user file will return to
the factory settings.
•
The TIME ZONE setting does not return to its factory
default.
To initialize the scene file
Select INITIAL in LOAD/SAVE/INIT of the SCENE FILE
screen. The settings for the scene file selected in FILE
SELECT of the SCENE FILE screen will return to the factory
settings.
•
This does not affect any other scene files.
Initializing user files and scene files
simultaneously
You can return the user files and the six scene files to their
factory defaults by selecting YES in the menu option MENU
INIT in the OTHER FUNCTIONS screen.
•
The TIME ZONE setting does not return to its factory
default.