Filter
Top Products
13
Chapter 1 Overview
Setting for Your Area (Color TV Standard Setting)
This unit is delivered with the area setting, such as the color TV standard, not yet specified. To revise the settings, perform
the following steps:
1
After connecting the unit to the power supply
then turning on the power, hold down the
DISP/MODE CHK button and press the MENU
button.
9.
10.
11.
12.
13.
CARD FUNCTIONS
3D ASSIST
OTHER FUNCTIONS
DIAGNOSTIC
OPTION MENU
PUSH MENU TO EXIT
MAIN MENU
2
Check that OPTION MENU is selected then
press the JOG dial button.
The OPTION MENU screen opens.
3
Turn the JOG dial button to move the cursor to
the AREA SELECT item then press the JOG
dial button.
For details on menu operations, refer to [Using the
Menus] (page 106).
>>>
NTSC
PUSH MENU TO RETURN
AREA SELECT
OPTION MENU
SET
4
Turn the JOG dial button to select the color
TV standard of your area, NTSC or PAL, then
press the JOG dial button.
OPTION MENU
PUSH MENU TO RETURN
PAL
NTSC
AREA SELECT
SET
5
Turn the JOG dial button to select SET then
press the JOG dial button.
AREA SELECT
PUSH MENU TO RETURN
OPTION MENU
>>>
NTSC
SET
6
Select EXECUTE then press the JOG dial
button.
NTSC
RETURN
EXECUTE
PUSH MENU TO RETURN
AREA SELECT
OPTION MENU
SET
7
Turn the JOG dial button to select YES then
press the JOG dial button.
INIT NTSC SETTING
ARE YOU SURE ?
PUSH SETYES
NO
AREA SETTING
The message “TURN POWER OFF” appears on the
screen.
8
Turn the power off and then turn it back on
again.
• The setting selected in step 4 is reflected in
factory defaults and current operating status
values.