Panasonic AG-3DP1G Camcorder User Manual


 
18
Chapter 2 Parts and their Functions
Audio (output) Function Section
2
1 3 5
4
5
1 MONITOR SELECT (audio channel) CH1/2, CH3/4
selector switch
Use this switch to select the audio channel whose
signals are output to the speaker or earphones.
CH1/2: Signal output of audio channels 1 and 2.
CH3/4: Signal output of audio channels 3 and 4.
The channel indications of the audio level meters on the
LCD monitor and in the viewfinder show the channels
selected with this switch.
2
MONITOR SELECT (audio selection) CH1/3, ST,
CH2/4 selector switch
This switch and the MONITOR SELECT CH1/2, CH3/4
switch select the audio signal output to the speaker or
earphones.
MONITOR SELECT
switch (upper)
MONITOR SELECT switch (lower)
CH1/2 CH3/4
MONITOR
SELECT
CH1/3 Audio Channel 1 Audio Channel 3
ST
Stereo signals
from Audio
Channels 1 and 2
*
1
Stereo signals
from Audio
Channels 3 and 4
*
1
CH2/4 Audio Channel 2 Audio Channel 4
*
1
MIX in the menu option MONITOR SELECT in the
AUDIO SETUP screen allows you to change stereo
signals to a mixed signal.
3
MONITOR (volume) control
Use to control the alarm sound volume and volume of
sound output from the monitor speaker and earphones.
4
Speaker
The speaker outputs EE sound during recording and
reproduced sound during playback. The speaker emits
an alarm sound when the WARNING lamp and indicator
light or blink. EE sound and reproduced sound are not
output during alarm sound output.
When earphones are connected to the PHONES
connector, the sound from the speaker is automatically
muted.
5
PHONES (earphones) jack (mini jack)
This connector is designed for audio monitoring (stereo)
earphones.