Filter
Top Products
129
Chapter 9 Maintenance and Inspections
Priority
Warning
type
LCD indication Tally lamp
WARNING
lamp
Alarm
tone
Warning description
and recording/playback
operation
Countermeasures
11
Drop in
reception
quality of
wireless
receiver
transmission
WIRELESS RF
*
8
Blinks red
Blinks 4
times per
second
(Recording
only)
Blinks 4
times per
second
No
Indicates poor reception
from the wireless receiver.
Recording continues but
wireless microphone cannot
be received.
Check microphone
power supply and
receiver reception
status.
12
Battery
nearly empty
The last bar in the battery
level indication blinks (This
indication appears even if
CARD/BATT is set to OFF
in the DISPLAY SETUP
screen.)
Blinks 1 time
per second
Blinks 1 time
per second
No
The battery is near depletion.
Operation continues.
*
9
Replace the battery
as necessary.
13
P2 card
nearly fully
recorded
The P2 card level indicator
blinks.
Blinks 1 time
per second
during
recording.
Blinks 1 time
per second
during
recording.
No
Less than 2 minutes is left on
the P2 cards (level indicator
shows 1 minute or less). This
warning appears only during
recording.
Replace the P2
cards as necessary.
*
8
The warning can be disabled by setting the WIRELESS WARN option on the AUDIO SETUP screen to OFF.
*
9
When NEAR END CANCEL is set to ON, you can press the DISP/MODE CHK button to cancel the alarm.