Panasonic AG-3DP1G Camcorder User Manual


 
42
Chapter 3 Recording and Playback
Normal and Variable Speed Playback
Normal speed playback
Press the PLAY/PAUSE button to view playback on the LCD
monitor and in the viewfinder in color. Connecting a color
video monitor to the HD SDI MONITOR OUT, HD SDI OUT
1(L)/2(R) or HDMI connector will enable playback of color
video.
The PLAY/PAUSE button can be used to pause playback.
During normal playback, 3D display mode is available.
(3D recording mode)
Fast-forward/fast-reverse playback
The FF and REW buttons provide 32× and 4× fast
playbacks and fast reverse playbacks. In stop mode, this
function will play back video at 32× speed and in playback
mode, it will play back video at 4× speed.
Only 2D display mode is available during fast-forward
and fast-reverse playback.
Clip cue up
When playback is paused, the FF button locates the
beginning of the next clip while staying in pause mode.
When playback is paused, the REW button locates the
beginning of the current clip while staying in pause mode.
NOTE
• It may take some time to load clip data if playback is started
or a thumbnail screen is opened right after removing or
inserting a P2 card or turning the power on. The thumbnail
screen displays UPDATING at such times.
• To play back a clip in a different SYSTEM MODE, adjust
the SYSTEM MODE to the clip to reset the camera before
playback.
• Playback of the audio channels CH5 to CH8 recorded on
another device is not possible.
• For information on the output connectors and video output
formats depending on the settings, refer to [Selecting Video
Output] (page 44).