Filter
Top Products
48
Chapter 4 Adjustments and Settings for Recording
Setting the Electronic Shutter
Setting the Shutter Mode and
Speed
1
Press the SHUTTER switch positioned at OFF
towards ON.
SHUTTER switch
2
Press the SHUTTER switch towards SEL.
Repeat this switchover until the desired mode or
speed appears on the LCD monitor and in the
viewfinder.
• If all modes and speeds are available, the display
changes in the following order:
•
The bracketed ( ) speeds cannot be selected
when VFR is on.
When SYSTEM MODE is set to 1080-59.94i or
720-59.94P
F
or 60i and 60P recording
(1/15) (1/30) 1/60
1/100
S/S
1/120
1/250
For 30P recording
(1/15) 1/60 1/100
1/250
S/S
1/120
For 24P recording
(1/12) 1/60 1/100
1/250
S/S
1/120
When SYSTEM MODE is set to 1080-50i or 720-
50P
F
or 50i and 50P recording
(1/12.5) (1/25) 1/50
1/60
1/250
S/S
1/120
For 25P recording
(1/12.5) 1/50 1/60
1/250
S/S
1/120
NOTE
• In any electronic shutter mode, a slower shutter speed will
reduce camera sensitivity.
• In auto iris mode, a faster shutter speed will increase the
aperture and lower the depth of field.
• Changes in synchro scan and shutter speed settings may
cause screen flicker.
• Under fluorescent lighting and other discharge lighting
systems, horizontal stripes may appear on the screen.
Changing the shutter speed may correct this problem.
• A subject that is captured when moving quickly across the
field of view may appear distorted. This is due to the signal
read out format of the image sensor (MOS sensor) and is not
a malfunction.
• The red, blue and green dots that may appear on the screen
at low shutter speeds do not indicate a malfunction.