Filter
Top Products
50
Chapter 4 Adjustments and Settings for Recording
Assigning Functions to USER Buttons
The USER MAIN, USER1, and USER2 buttons can be
assigned user-selected functions.
Use the menu options USER MAIN, USER1, and USER2 to
assign functions to respective button. Select these items
from the setting menu SW MODE screen.
PUSH MENU TO RETURN
MID GAIN
HIGH GAIN
USER MAIN
0dB
6dB
12dB
USER1 Y GET
USER2 SHOT MARK
RET REC CHECK
LCD/EVF MIX/R
PUSH AF
LOW GAIN
SW MODE
Selectable Functions
• PUSH AF:
Assigns temporal auto focusing while holding
the PUSH AF button down.
• Y GET:
Assigns a function that displays the brightness
level at the center of the image.
• SHOT MARK:
Assigns the shot marker function.
• REC CHECK:
Assigns the REC CHECK function.
• R CONV:
Assigns a function that contr
ols the convergence
point adjustment from the extension control
unit (AG-EC4G) connected to the REMOTE
connector. (USER MAIN and USER1 buttons
only)
• 3D A.Z WFM:
Assigns a 3D assist function Z.WFM.
• 3D A.ALERT:
Assigns a 3D assist function ALER
T.
• 3D A.CONV.:
Assigns a 3D assist function CONV
.
NOTE
The default settings are listed below.
• USER MAIN: PUSH AF
• USER1: Y GET
• USER2: SHOT MARK