Filter
Top Products
Operating Instructions
105
2.8 Use Remote Access Functions
Using the recording software on a separate PC, you can view the recorded images
from a Panasonic Network Camera connected to a PC (remote server) registered
with the recording software.
• To use remote access functions, you must install the recording software on the
remote server and remote clients. You must have enough licenses for the
remote server and remote clients.
• Only one remote client can be connected to a remote server at a time. Other
PCs cannot connect to a remote server when one is already connected.
• Some operations, such as Executing Restore Program, cannot be used (see
page 111).
• It may not be possible to connect to a remote server from proxy servers that
serve as the company firewall. If you have difficulties connecting to a remote
server, consult a network administrator.
• You may have problems using a remote server if you access it through a proxy
server. Consult a network administrator before configuring a remote server.
Internet
Remote client
Remote server
Operate the
recording
software on the
server via the
Internet.
Modem
Modem
Router
Camera
Camera
notification
area of the
PC