Filter
Top Products
Operating Instructions
138
Enter English one-byte character
in "Proxy User Name".
→ Follow the instruction message.
Enter English one-byte character
in "Proxy Password".
→ Follow the instruction message.
Do you apply the proxy settings to
all cameras? But IPv6 address
cameras are excepted.
• You checked [Use a proxy server] at proxy
server settings on the preferences page. (If no
cameras are registered, this message will not
be displayed.)
→ Follow the instruction message.
"Port" is already set on the proxy
server settings. Cannot input port
number over again in the "Proxy
Server Address". Check the port
number and try again.
• You set a port number for both the "Proxy
Server Address" and the "Port".
→ Follow the instruction message.
The proxy server could not be
authenticated. The IP address and
port number settings may be
incorrect. Do you want to keep
these settings?
• The proxy server cannot be accessed.
→ Check the address and port number of the
proxy server.
The proxy server authentication is
not available. Enter the correct
user name and password, and try
again.
• This software does not pass the proxy
authentication.
→ Check the user name and password of the
proxy server.
IPv6 connection is not supported
for proxy server. Set the IPv4
address or URL of the IPv4
domain name service.
→ Follow the instruction message.
Multi-Monitoring
If [Total Page] is set as [1], [Switch
the multi pages in order] cannot be
specified.
• This function is available when there are
multiple pages.
→ Follow the instruction message.
All frames cannot be selected. • You cannot select all of the frames when
enlarging an image frame.
→ Follow the instruction message.
Message Cause and Remedy