Operating Instructions
145
No matching images were found. • The recorded images could not be found.
Conversion/Copying
"Start Time" should be within the
recording time.
• The start time is not within the recording time.
→ Follow the instruction message.
Set the "Start Time" so that it
comes before the End Time.
• The start time comes after the end time.
→ Follow the instruction message.
Set the "End Time" so that it
comes after the Start Time.
• The end time comes before the end time.
→ Follow the instruction message.
"End Time" should be within the
recording time.
• The end time is not within the recording time.
→ Follow the instruction message.
Conversion interval should be
between 1 and (the number of
images - 1).
• The frequency is not between 1 and (the
number of images - 1), or the space was blank.
→ Follow the instruction message.
Conversion interval should be
between 1 and (end time - start
time [seconds]).
• The number is larger than the time period
between the start time and end time, or the
space was blank.
→ Follow the instruction message.
Conversion interval should be
between 1 and 3600.
• The image is recorded for more than 1 hour,
but the converted interval is not between 1 and
3600.
→ Follow the instruction message.
The recorded images could not be
found. Search the recorded
images and try again.
• There is no recorded images.
→ Search the recorded images and try again.
A write error has occurred. • An error has occurred in conversion or the
converted file has been opened in another
application.
→ Search the recorded images and try again.
→ Close other applications and try again.
Conversion is canceled. • You clicked cancel button while converting the
image.
Cannot convert images that are
being recorded.
• You cannot convert a recorded image that
does not last more than one minute from when
it started recording.
Message Cause and Remedy
