Filter
Top Products
Operating Instructions
140
Camera Settings
Message Cause and Remedy
Camera Settings
Enter a number in one-byte
character in "Port".
→ Follow the instruction message.
Enter "Camera Name". • The Camera Name space was blank.
→ Follow the instruction message.
Enter "Camera Address". • The Camera Address space was blank.
→ Follow the instruction message.
Enter English one-byte character
in "Camera Address".
→ Follow the instruction message.
"Port" should be between 1 and
65535.
• A number not between 1 and 65535 was
entered in the Port blank.
→ Follow the instruction message.
Enter English one-byte character
in "User Name".
→ Follow the instruction message.
Enter English one-byte character
in "Password".
→ Follow the instruction message.
"Camera Name" should be 250
characters or less.
• The Camera Name was more than 250
characters.
→ Follow the instruction message.
"Comment" should be 128
characters or less.
• The Comment was more than 128 characters.
→ Follow the instruction message.
Camera Name: ***
Delete the specified camera.
• "****" = Camera Name
→ Follow the instruction message.
Port is already set on the camera
settings. Cannot input port number
over again in the "Camera
Address". Check the port number
and try again.
• You can not set port number to both camera
address and port space.
→ Follow the instruction message.