Filter
Top Products
Operating Instructions
141
Connection to the camera cannot
be confirmed. The IP address, port
number, proxy settings may be
incorrect. Do you save them?
• The camera cannot be accessed.
→ Follow the instruction message.
Connection to the camera could
not be confirmed. The IP address,
port number, or proxy settings may
be incorrect. Check your settings
and try again.
• The camera cannot be accessed.
→ Follow the instruction message.
The camera authentication is not
available. Enter the correct user
name and password, and try
again.
• This software do not pass the camera
authentication.
→ Follow the instruction message.
Some settings are unavailable
because the functions of the
selected camera have not been
confirmed. Click the [Camera
Function Check] button and check
the functions.
→ Follow the instruction message.
Cannot use a proxy server to the
IPv6 camera address. To use a
proxy server, set the IPv4 address
or URL of the IPv4 domain name
service for the camera.
→ Follow the instruction message.
Image Settings
If using the MPEG-4 format, the
recording frequency setting,
motion detection recording and
alarm/sensor recording are not
available.
→ Follow the instruction message.
Motion detection recording is used
in the timer [XXXX] for the camera.
Change the timer settings first,
then select the MPEG-4 format.
• "XXXX" = Timer Name
→ Follow the instruction message.
Message Cause and Remedy