Filter
Top Products
Operating Instructions
76
Setting Description
Monitor Screen
Layout
Configure the screen layout (rows x columns) for a window. You
can simultaneously monitor the images of a maximum of 64
cameras. (1 x 1, 2 x 2 (Default), 3 x 3 to 8 x 8)
Page/Total Page If the number of registered cameras exceeds the limit of
screens in a window, extra pages are automatically created to
accommodate the number of cameras.
If there are several pages, select the page that you want to
configure settings for.
Setting the camera
to display
When you click in a display frame, a list of your registered
cameras is displayed. Select the camera that you want to
display in the frame.
Click to Center
Function
You can select whether or not to use the click to center function.
Clear the check mark if you will not use the function.
Switch the multi
pages in order
If there are several pages of images, select [Switch the multi
pages in order] to automatically switch the page every specified
number of seconds (see
page 80). (1 to 60 seconds Default: 5
seconds)
Image display
format
Configure the aspect ratio of displayed camera images.
Fits the entire display area: Resize the image to fit in the display
area.
Maintain the aspect ratio: Resize the image to fit the window
while maintaining the aspect ratio of the camera.
Untouched centering display: Display the image at actual size,
centering the image in the display frame.
Background color Configure the background colors for the frames of disabled
cameras (see
page 21), error cameras and no camera (see
page 80). Specify the colors for each background, respectively.
The defaults are Disabled camera: Gray, Error camera: Blue
and No camera: Black.
Set the
transparency level
Select the check box to set the transparency level of the image
information (camera name, frame rate, motion detection bar,
recording icon) that is displayed on the multi-monitoring page.
The default is 50%.
Focus and selected
frame width/color
You can change the width and color of the frames for the focus
camera and selected cameras. Specify the colors for each
frame respectively. The defaults are frame width: 3, focus
frame: Red and selected frame: Blue.