Filter
Top Products
Operating Instructions
13
Basic Settings Page
Setting Description
Destination Folder
Specify the destination folder to save recorded images (see
page 14).
Destination Hard
Disk Space
Set enough capacity as your destination disk to prevent the
system from getting unstable. (100 MB (Default) to 50,000 MB).
Limit the destination
recording capacity
To specify the limit of how much data can be recorded on the
destination disk, select [Limit the destination recording capacity]
and enter a value in [Destination Recording Capacity Limit].
Select [Stop all the recordings] or [Delete old files and keep
recording] (by 1 minute) when the capacity is full.
Connection method
to the camera
Set the connection method to use for audio and video when the
camera’s data format is set to JPEG (see page 24).
If you monitor and record camera images with audio over the
internet, the audio may be interrupted due to the network
environment. If this is the case, select [Images and audio are
connected separately].
There is a limit to the number of connections to the same camera
using this software (including BB-HNP11). If you select [Audio
and images are sent using one connection], do not make more
than 4 connections to the same camera. If you are making more
than 4 connections, select [Images and audio are connected
separately].