Filter
Top Products
Operating Instructions
28
Setting the motion detection level
You can set the level at which to start motion detection recording.
Motion detection recording only operates when the JPEG format is selected.
If the MPEG-4 format is selected, change the format to JPEG (see page 24).
Motion Detection Page
Motion detection monitoring window
You can monitor the progress of motion detection.
The cell where motion
was detected is displayed
in red.
Setting Description
Non Motion
Detection Operation
If you check the box, the motion is not detected during the pan,
tilt or zoom operation of the camera.
(If the camera does not support the MPEG-4 format, this is
grayed out.)
Motion Detection
Analysis Frequency
Set the interval for comparing images.
By increasing the interval, you can better detect slow-moving
objects, and by decreasing the interval, you can better detect
fast-moving objects.
Threshold to Start
Recording
The image is divided into 100 cells. If the number of cells that
detect motion exceeds the threshold, recording starts.
A lower threshold is more sensitive to small amounts of motion.
Cell Sensitivity Set the sensitivity in a cell.