Filter
Top Products
Operating Instructions
52
2.3.2 Using the Camera Operation Bar
You can use the camera operation bar that is displayed on the multi-monitoring
page to operate the camera.
1. Select [Window] [Camera Operation] on the menu bar.
Allows you to remotely control external devices that are
connected to the camera. Set according to the external
device that is connected.
c.
Pan/Tilt
Scan *
1
a.
Preset Display
Refresh
The latest registered buttons are displayed (see page 54).
b.
Preset
Button*
1
(See page 54).
e.
Zoom*
1
(See page 53).
f.
Focus*
1
(See page 53).
g.
j.
Output
a
b
c
d
h
f
g
e
j
k
i
Left End
If a feature is not permitted, the buttons will be disabled.
The operation bar differs depending on the camera type.
*1
If the camera disables their controls, you cannot control their features.
*2
If the camera disables their controls, they may be unable to function.
Displays resolution/image quality. Change these
settings on the camera's settings page
(see page 24).
k.
Resolution/
Image Quality
When the lens has reached the end of its pan, tilt
range, the appropriate message will be displayed here
([Up End], [Down End], [Right End], [Left End]).
Additionally, when a preset is selected, the name of
the preset is displayed here. If a camera has limited
controls, "Locked" is displayed.
Moves the lens throughout the horizontal ( ) or
vertical ( ) range, and returns to the original position.
h.
Brightness*
2
Allow you to change the brightness of the displayed
image. Click [-] to darken the image, [+] to brighten the
image, and [STD] to return the image to the standard
brightness level.
d.
Pan/Tilt/Home
Position
*
1
Controls lens direction. Pan ( : Left, : Right),
Tilt ( : Up, : Down) and Home Position ( : Center)
i.
White
Balance
*
2
Allows you to select the white balance of the camera
([Auto
(Default)], [Indoor], [Fluorescent (White)], [Fluorescent
(Daylight)], [Outdoor], [Hold])
.