Filter
Top Products
104
File Operations
Chapter 5 Storage and Retrieval of User Setting Data
During formatting, “MEMORY STICK ACCESS” is
displayed.
When formatting is completed, “COMPLETE” is
displayed.
5-3-2 Storage and Retrieval of the
Operator File
Use the <OPERATOR FILE> page of the FILE menu.
The <OPERATOR FILE> page is also included in the
USER (OPERATION) menu (see page 57).
To store the operator file in a “Memory
Stick”
Perform necessary settings for the operation items and the
customized USER menu for the operator file you wish to
store.
1
Insert a “Memory Stick” into the “Memory Stick” slot
of the camera.
2
Position the pointer to WRITE (CAM t MS) and
push on the MENU SEL/ENTER dial.
You can add a comment (maximum: 14 characters) to the
operator file to be stored in the “Memory Stick” by
specifying it on the FILE ID line.
For details on how to enter a comment, see “Specifying a
character string” (page 66).
To retrieve the operator file stored in a
“Memory Stick”
The operator file stored in the “Memory Stick” can be read
out into built-in memory of the camera.
1
Insert the “Memory Stick” into the “Memory Stick”
slot of the camera.
2
Position the pointer to READ (MS t CAM) and push
on the MENU SEL/ENTER dial.
The camera will be set according to the data loaded from
the operator file.
To return the operator file items to the
factory-set values
Position the pointer to PRESET and push on the MENU
SEL/ENTER dial.
You can also use the <FILE PRESET 1> page (page 107)
of the FILE menu for this purpose.
5-3-3 Registration and Retrieval of
the Lens Files
The registered lens files can be retrieved via the subdisplay
or the <LENS FILE> page of the OPERATION menu.
To register the data you adjusted for the mounted lens as a
lens file, or to use a “Memory Stick,” the <LENS FILE>
page of the FILE menu is used.
To store the data as a lens file in built-in
memory
Perform necessary settings for the items marked with “a”
in the L column of the table in “5-2 List of Items Stored in
Files” for the lens file you wish to store.
1
Select the file number, and set the file name.
For setting of file names, see “Specifying a character
string” (page 66).
2
Position the pointer to STORE FILE and push on the
MENU SEL/ENTER dial.
Storage of the position settings for the center marker can
be independently performed.
You can confirm the effect of the WHITE R/B
compensation that has been set in the file, by changing the
setting for WHITE R/B to OFF.
<FILE PRESET 1> F07 TOP
OPERATOR FILE
USER MENU
c
M.S. FORMAT
<OPERATOR FILE> F01 TOP
READ (MS
t
t
CAM)
WRITE (CAM
t
MS )
PRESET
FILE ID:
CAM CODE
DATE
<LENS FILE> F05 TOP
c
STORE FILE
No. : 1
NAME: No Offset
CENTER H : 0
V : 0 STORE
WHITE R/B: ON
LENS MS READ/WRITE