Filter
Top Products
86
Menu List
Chapter 4 Menu Configuration and Detailed Settings
<AUDIO>
Selecting the IF BOX
output SDI channels
to which the
microphone inputs
are added and
setting the signal
delay compensation
M06
[M02]
CAMERA MIC CH
SELECT
IF BOX
CH5/6 CH1/2, CH5/6
Note
The microphone inputs
added to SDI signals sent
to the SRW-1 directly
docked on the camera or
optically connected to the
camera via the CA-F101
are fixed to CH5/6.
DELAY COMP ON ON, OFF ON: The audio delay is
automatically
compensated according
to the video delay on
the main line output of
the camera.
OFF: Only video delays
while audio does not
delay on the main line
output of the camera.
For details, see “Lip Sync
Compensation” (page 137).
AUDIO DELAY 0 to 3 FRAME DIsplays the amount of
audio delay (in 0.5-frame
steps)
VIDEO DELAY 0 to 3 FRAME DIsplays the amount of
video delay (in 0.5-frame
steps)
<OUTPUT
FORMAT>
Setting the output
video format
M07
[M03]
CURRENT 23.98PsF 4:4:4 The current format is
displayed.
NEXT The format specified on the
subsequent lines and to be
selected by executing SET
FORMAT is displayed.
SCAN PROGRESSIVE PROGRESSIVE,
INTERLACE
FRAME 23.98 23.98, 24, 25, 29.97, 30,
50, 59.94, 60
When SCAN is
PROGRESSIVE
FIELD 59.94 59.94, 50 When SCAN is
INTERLACE
SIGNAL 4:4:4 RGB 4:4:4 RGB, 4:2:2 YCbCr
SELECT FPS OFF ON, OFF
SET FORMAT Execute by ENTER.
<DOWN
CONVERTER>
Setting the aspect
ratio for VBS output
M08
[M04]
ASPECT LB SQ, LB, EC SQ: Squeeze
LB: Letter Box
EC: Edge Crop
<POWER SAVE>
Selecting the output
power save mode
M09
[M05]
MONITOR OUT ACTIVE PWR SAVE, ACTIVE
DOWN CONVERTER ACTIVE PWR SAVE, ACTIVE
MAINTENANCE menu
Page title &
purpose
No. Item Default Settings Remarks