Filter
Top Products
34
Basic Settings with the Subdisplay
Chapter 3 Basic Adjustments and Settings
The speed value for the shutter angle varies depending on
the selected video format and frame rate.
To select the frame rate (number of frames
per second)
When a video format of “Select FPS” is selected, the frame
rate (number of frames per second) can be selected.
1
Move the cursor to 4.
2
Display the frame rate (number of frames per second)
you wish to use by turning the MENU SEL/ENTER
dial.
If a format other than those of “Select FPS” is selected, the
frame rate cannot be changed.
To use Compensation mode
This camera enables you to compensate for changes in the
video level when the FPS value is changed.
Two compensation modes are provided: one that depends
on shutter angles and another that depends on electric gain.
1
Move the cursor to 5.
2
Select the compensation mode you wish to use by
turning the MENU SEL/ENTER dial.
AC: Angle Compensation mode
When you change the frame rate, the shutter angle is
automatically corrected, retaining the video level.
GC: Gain Compensation mode
When you change the frame rate, the electric gain is
automatically corrected, retaining the video level.
The current shutter angle setting is maintained.
For details on switching of the compensation modes with
the menu, see “3-9 Detailed Shutter Settings” (page 56).
When shutter is not used
Select OFF at 3.
The shutter value indication at
2 becomes “----”.
To change the registered values for the
step shutter
Call up the <SHUTTER ASSIGN> page of the USER
(OPERATION) menu on the viewfinder.
For details on how to operate the menu, see “4-2 Basic
Menu Operations” (page 64).
<SHUTTER ASSIGN> page
STEP 1-8
In the [deg] column on each line, the registered shutter
angle is indicated. In the [sec] column, the shutter speed
value converted according to the currently selected frame
rate is displayed.
ADD
For newly registering a step shutter value.
Display a shutter angle you wish to register then push on
the MENU SEL/ENTER dial. The selectable angle values
are from 360.0 to 4.3 degrees. The Step shutter values are
automatically sorted in descending order.
If eight values have been already registered, the message
“STEPS FULL” is displayed, and a new value will not be
added. In such a case, delete an unneeded value
beforehand, using DEL.
DEL
For deleting registered step shutter values.
When the pointer is positioned at DEL, an asterisk (*) is
displayed at the left of STEP 1.
Move the asterisk to the left of the value you wish to delete
then push on the MENU SEL/ENTER dial. That value is
deleted, and the items after the deleted one will be
automatically renumbered.
Example: When deleting 90.0
v
As the numbers for which no value is registered are
skipped during a selection operation, deleting step shutter
values with lower frequency of use will improve the
operation speed.
At maximum, numbers 2 to 8 can be left unregistered.
<SHUTTER ASSIGN> 10 TOP
STEP [deg] [sec]
1:
216.0 (1/39.97)
2: 180.0 (1/48.00)
3: 172.8 (1/50.05)
4: 150.0 (1/57.63)
5: 144.0 (1/60.07)
6: 90.0 (1/95.92)
7: 45.0 (1/192.2)
8: 22.5 (1/383.0)
ADD:
B
---.- DEL PRESET
3: 172.8 (1/50.05)
4: 150.0 (1/57.63)
5: 144.0 (1/60.07)
*6: 90.0 (1/95.92)
7: 45.0 (1/192.2)
8: 22.5 (1/383.0)
ADD: ---.-
B
DEL PRESET
3: 172.8 (1/50.05)
4: 150.0 (1/57.63)
5: 144.0 (1/60.07)
6: 45.0 (1/192.2)
7: 22.5 (1/383.0)
8: ---.- (-/---.-)
ADD: ---.-
B
DEL PRESET