Filter
Top Products
95
Menu List
Chapter 4 Menu Configuration and Detailed Settings
4-3-6 DIAGNOSIS Menu
This menu is only for viewing and no setting is made using
this menu.
Page title No. Item Indication Remarks
<BOARD STATUS> D01 OHB OK, NG Display only (If NG is displayed, consult
your local Sony representative.)
AD OK, NG
DPR OK, NG
VDA OK, NG
TR OK, NG
AT OK, NG
<SYSTEM
STATUS>
D02 DOCKING STATUS Indicates the device docked on the top or
rear of the camera.
– – –: No device
IF BOX: Interface box supplied with the
camera
VTR: SRW-1 video recorder
OPT CA: CA-F101 (Changes to “OPT CA
– VTR” when the CA-F101 and the
SRPC-1 is connected via a hybrid
optical camera cable.)
(IF BOX), (OPT CA): Indicated in
parentheses if combination use of the
docked device is not allowed.
TOP – – –, IF BOX, VTR, OPT CA,
(IF BOX), (OPT CA)
REAR – – –, IF BOX, VTR, OPT CA,
(IF BOX), (OPT CA)
OPTICAL STATUS Indicates the optical reception status on
the camera side (VTR
t
CAM) and that on
the recorder side (CAM
t
VTR) while
signal transmission is in progress.
OK: Normal
CARE: Cautioning level
WARNING: Warning level
NG: Unusable level
NO SIGNAL: No signal
VTR
t
CAM OK, CARE, WARNING, NG, NO
SIGNAL
CAM
t
VTR OK, CARE, WARNING, NG, NO
SIGNAL
<PLD VERSION> D03 TG Vx.xxx Display only
AD Vx.xxx Display only
PRE Vx.xxx Display only
POST Vx.xxx Display only
TX Vx.xxx Display only
RX Vx.xxx Display only
VDA Vx.xxx Display only
AT Vx.xxx Display only
<ROM VERSION> D04 MAIN Vx.xx, M/D/Y Display only
NET Vx.xx, M/D/Y Display only
BOOT Vx.xx, M/D/Y Display only