Filter
Top Products
83
Menu List
Chapter 4 Menu Configuration and Detailed Settings
Noise Suppression
This function you can enable on the PAINT menu <NOISE
SUPPRESS> page effectively suppresses noise components
while maintaining fine edge components of a subject.
As the noise suppression function of this camera employs a
system to extract and depress noise within a frame, it also
shows strong characteristics for movement of a subject
compared with noise reduction that uses frame correlation.
You can select from among 4 effect levels; LOW (30%), MID
(60%), HIGH (90%), MAX (100%).
LOW: To mainly cut noise components in the high range
MID: To mainly cut noise components in the high and middle
ranges
HIGH: To mainly cut noise components in the high, middle,
and low ranges
MAX: To mainly cut noise components in the high, middle,
and low ranges
The % values are references of the effect when assuming the
maximum is 100%.
This function somewhat affects frequency components of
actual images, and the contours of low-luminance blocks may
be weakended. A preliminary test shooting is recommended
to check in advance.
<SCENE FILE>
Storing and
retrieving scene
files (data set by the
PAINT menu)
P16
[ - - ]
1 When storing a file in camera
memory, specify the number
before executing STORE.
When reading, only specify
the number.
2
3
4
5
01 01 to 32 To specify the scene file
number 01 to 32 when 32
SCENE FILE of <OTHERS 2>
of the MAINTENANCE menu
is ON.
STORE Execute by ENTER.
STANDARD Execute by ENTER. To read the standard paint
data
READ (MStCAM) Execute by ENTER. To load scene files from a
“Memory Stick” to internal
memory
WRITE
(CAMtMS)
Execute by ENTER. To write scene files in the
camera’s memory to a
“Memory Stick”
FILE ID Max.14 characters Enter a comment for the
scene files to be written to a
“Memory Stick.”
CAM CODE Camera code Display only (When files made
on are detected, “F35” is
displayed.)
DATE Date of file creation Display only
PAINT menu
Page title &
purpose
No. Item Default Settings Remarks
Note