Filter
Top Products
12
Locations and Functions of Parts
Chapter 1 Overview
1-3 Locations and Functions of Parts
1-3-1 Camera Head
Front panel
a VF1 (viewfinder 1) connector (20-pin)
Connect a viewfinder (optional).
b CONTROL PANEL connector
Connect with the CAMERA connector of the supplied
assistant panel (page 17).
c Accessory receptacles
Using these screw holes in combination with the accessory
pockets (page 13) on the left side, you can fix a certain
accessory to the left side of the camera.
d VF2 (viewfinder 2) connector (20-pin)
Connect a second viewfinder (optional), e.g. for an
assistant.
When two viewfinders are connected at the same time (via
the VF1 and VF2 connectors), the HDVF-C950W cannot
be used because of a limitation of current capacity.
e LENS connector (12-pin)
To use a lens control unit (optional), connect it to this
connector. You can control the iris of the lens through this
connector.
Do not connect a device whose maximum rated current is
500 mA or higher to the LENS connector.
f Viewfinder shoe
Attach an optional viewfinder.
The height of the attaching position can be adjusted.
For details, see “2-5 Attaching a Viewfinder” (page 24).
g Flange focal length adjustment screw
You can adjust the flange focal length with the screw
behind the cover.
For details, see “Adjusting the flange focal length” (page
23).
h Lens fixing lever
Turn the lever clockwise to secure the lens in the lens
mount. To remove the lens, turn the lever
counterclockwise.
For details, see “2-4 Attaching a Lens” (page 23).
i Lens mount cap
Cover the lens mount with this cap when a lens is not
attached. The cover may be removed by rotating the lens
fixing lever counterclockwise.
j Shutter emergency opening screw
You can forcibly open the shutter in an emergency.
For details, see “To forcibly open the shutter” on page
127.
CONTROL
PA NE L
VF2
LENS
VF1
bCONTROL PANEL connector
cAccessory receptacles
dVF2 connector
fViewfinder shoe
Lens mount
iLens mount cap
aVF1 connector
hLens fixing lever
gFlange focal length adjustment screw
jShutter emergency open screw
eLENS connector
Ventilation holes (intake)
Ventilation holes (intake)
Note
Note