Filter
Top Products
50
Viewing and Setting the Viewfinder Displays
Chapter 3 Basic Adjustments and Settings
3-6-2 Viewing the LENS (Lens
Information) Display
Pressing the CANCEL/STATUS button calls the following
LENS display, showing the information of the mounted
lens.
a Focus position
The same as the “
3 Focus position” (page 49) of the basic
status indications, the focus position of the lens is
displayed.
b Iris setting indication
The same as the “
qs Iris setting” (page 49) of the basic
status indications, the iris setting of the lens is displayed.
c Zoom position
The same as the “
4 Zoom position” (page 49) of the basic
status indications, the zoom position of the lens is
displayed.
If no lens is mounted, 1 to 3 will be blank.
3-6-3 Viewing the ABNORMAL <!>
Display
If you press the CANCEL/STATUS button with the LENS
display on the screen, the display changes to following
ABNORMAL< ! > display, permitting you to check the
items for which the setting is not in the normal condition.
The display conditions can be set using the < ' ! ' IND>
page of the USER (OPERATION) menu.
Setting the ABNORMAL<!> indications
Set the conditions for the abnormal indications on the
< ' ! ' IND> page of the USER (OPERATION) menu.
<' ! ' IND> page
Indication of each item on the ABNORMAL< ! > display
is turned on or off in the [IND] column.
Set the normal condition for each item in the [NORMAL]
column.
If an item for which [IND] is set to ON becomes a
condition other than that specified in the [NORMAL]
column, the condition is indicated on the < ' ! ' IND> page.
IRIS Set to ON to obtain the iris setting indication
qs.
ZOOM Set to ON to obtain the zoom position
indication 4.
ND Set to ON to obtain the optical filter
indications 7.
5600K Set to ON to obtain the 5600 indication 6.
WHITE Set to ON to obtain the white balance
memory indication 5.
GAIN Set to ON to obtain the gain value indication
8.
SHUTT Set to ON to obtain the shutter indication 9.
UNIT Select the unit for the shutter indication.
deg: Shutter angle (Default)
sec: Shutter speed
BATT12 Set to ON to obtain the battery indications 2.
BATT24
REC Set to ON to obtain the recording mode
indication qa.
TAPE Set to ON to obtain the tape remaining
indication 0.
TC Set to ON to obtain the time code indication
qg.
MESSAG Select the type of messages to be displayed
in the message area qf.
ALL: To display all messages
AT: To display Auto Setup information and
higher
WRN: To display warning messages and
higher
OFF: To display warning messages of the
highest level only
Item Setting
F999999mm LENS T03.00
Z40
1
2
3
ABNORMAL<!>
!ND :1
!WHITE :A
!5600K :OFF
!SHUTT :360.0deg
!FAN : MAX
!G-COMP :ON
<'!'IND> U02
[IND] [NORMAL]
ND :
B
ON 1----
WHITE : ON P--
5600K : ON OFF
SHUTT : ON OFF
FAN : ON AUTO1
G-COMP: ON