Filter
Top Products
87
Menu List
Chapter 4 Menu Configuration and Detailed Settings
<BATT ALARM
SET>
Setting the voltage
values to trigger
alarm indications
M10
[M06]
DC IN (24 V)
TYPE AC ADP BATT1, BATT2, AC ADP BATT1/BATT2: Batteries
AC ADP: AC adaptor
NEAR END 22.2 V 0.1 to 30.0 V Fixed to the default value
for AC ADP
END 21.6 V 0 to 29.9 V Fixed to the default value
for AC ADP
DC IN (12 V)
TYPE AC ADP BATT1, BATT2, AC ADP BATT1/BATT2: Batteries
AC ADP: AC adaptor
NEAR END 11.1 V 11.0 to 17.0 V Fixed to the default value
for AC ADP
END 10.8 V 10.5 to 14.0 V Fixed to the default value
for AC ADP
<GENLOCK>
Adjusting Genlock
with status
indications
M11
[M07]
REFERENCE INTERNAL, GENLOCK
IN
Display only
STATUS OK, NG, NO SIGNAL Display only
H PHASE 0 –511 to 511 To adjust the H phase for
genlock (With a CA-F101
mounted, “– – –” is
displayed and the setting
cannot be changed.)
<DATE>
Setting the built-in
clock
M12
[M08]
DATE/TIME yyyy/mm/dd
hh : mm
<METADATA>
Recording/
reproducing
metadata
M13
[M09]
EMBEDDED OFF ON, OFF To turn the function to
embed metadata on tapes
and SDI signals on or off
ANC LINE 9 (9) SDI V ANC LINE number
(currently fixed to 9)
TYPE USER1 (USER1) Format of items in
metadata (currently fixed to
USER 1)
REC MS WRITE OFF ON, OFF To turn the function to
simultaneously write
metadata to a “Memory
Stick” while embedding
them to SDI output in
recording on or off
PLAY MS WRITE OFF ON, OFF To turn the function to read
embedded metadata and
write them to a “Memory
Stick” in playback on or off
MAINTENANCE menu
Page title &
purpose
No. Item Default Settings Remarks