Filter
Top Products
53
Viewing and Setting the Viewfinder Displays
Chapter 3 Basic Adjustments and Settings
<ZEBRA> page
1) These items can also be set on the <CHAR/MARK MIX> page.
3-6-8 Setting the Cursor Indication
You can display a cursor on the viewfinder and monitor
screen.
Example: Box cursor
Activating/deactivating the cursor
indication
The <CHAR/MARK MIX> page of the USER
(OPERATION) menu permits you to activate/deactivate
the cursor indication for each output.
<CHAR/MARK MIX> page
The CURSOR indication is deactivated for all the outputs
at the factory.
Setting the type and size of the cursor
For the outputs for which you activate the cursor indication
on the <CHAR/MARK MIX> page, select and adjust the
cursor to be displayed on the next <MARKER SETTING>
page.
<MARKER SETTING> page
Item Function
VF1
1)
Turn the zebra indication on the
viewfinder connected to the VF1
connector on/off.
VF2
1)
Turn the zebra indication on the
viewfinder connected to the VF2
connector on/off.
MONITOR
1)
Turn the zebra indication on the monitors
connected to the MONITOR OUT
connectors on/off.
VBS
1)
Turn the zebra indication on a device
connected via the REMOTE connector
on/off.
ZEBRA TYPE Select the zebra(s) to be displayed:
1, 2, or 1&2
ZEBRA1 LEVEL Adjust the level (0 to 109%) of the zebra
1 indication (factory setting: 70%).
WIDTH Adjust the width (0 to 30%) of the zebra 1
indication (factory setting: 10%).
ZEBRA2 Adjust the level (50 to 109%) of the zebra
2 indication (factory setting: 100%).
<ZEBRA> U05
VF1 :
B
OFF
VF2 : OFF
MONITOR : OFF
VBS : OFF
ZEBRA TYPE : 1
ZEBRA1 LEVEL: 70%
WIDTH: 10%
ZEBRA2 : 100%
Menu item Function
VF1 Turn the cursor indication on the viewfinder
connected to the VF1 connector on/off.
VF2 Turn the cursor indication on the viewfinder
connected to the VF2 connector on/off.
MONI Turn the cursor indication on the monitors
connected to the MONITOR OUT
connectors on/off.
Menu item Function
CURSOR Select the type (BOX/CROSS) of the cursor
to be displayed.
POSI H/V Adjust the H (horizontal) position (–958 to
956) and the V (vertical) position (–538 to
536) of the center.
SIZE W/H Adjust the width (from the center to right or
left side) (16 to 1920) and the height (from
the center to top or bottom) (16 to 1080) of
the cursor.
<CHAR/MARK MIX> U09
VF1 VF2 MONI VBS
CHAR : ON ON ON ON
MARKER: ON ON ON ON
CURSOR:
B
OFF OFF OFF
ZEBRA : OFF OFF OFF OFF
CHAR/MARK LEVEL: 50
VF GATE MARKER : OFF
<MARKER SETTING> U03
CENTER : OFF 1
SAFETY : OFF 90.0%
EFFECTIVE : OFF
ASPECT : OFF 4:3
VARIABLE : --
SAFETY : OFF 90.0%
MASK : OFF 12
CURSOR :
B
BOX
POSI H/V : 0 0
SIZE W/H : 960 540