Filter
Top Products
96
Editing the USER Menu
Chapter 4 Menu Configuration and Detailed Settings
4-4 Editing the USER
Menu
You can select desired pages and items from the
OPERATION, PAINT, MAINTENANCE, NETWORK,
FILE, and DIAGNOSIS menus and register them to the
USER menu. If you specify pages or items frequently used
for the USER menu, you can easily call and use them.
The USER MENU CUSTOMIZE menu allows you to
configure a USER menu that consists only of pages and
items that you need, by your adding, deleting or replacing
pages.
Creating a new page
The USER MENU CUSTOMIZE menu allows you to add
a new page to the USER menu.
While the EDIT page contains factory-preset items, the
USER 1 EDIT to USER 19 EDIT pages are all blank in
their initial state. You can register up to 10 items, including
blank lines, on each of these pages.
To create a new page, proceed as follows.
1
While holding the CANCEL/STATUS button pressed,
press the VF MENU/DISPLAY button.
The TOP MENU screen appears.
2
Turn the MENU SEL/ENTER dial to move the pointer
to “USER MENU CUSTOMIZE,” then push on the
MENU SEL/ENTER dial.
If this is the first time the USER MENU CUSTOMIZE
menu has been displayed, the CONTENTS page of the
menu appears.
If the USER MENU CUSTOMIZE menu has been
used before, the page last accessed appears.
3
If the CONTENTS page is displayed, turn the MENU
SEL/ENTER dial to move the pointer to any of USER
1 EDIT to USER 19 EDIT then push on the MENU
SEL/ENTER dial to display the page.
If a different page is displayed, turn the MENU SEL/
ENTER dial until the desired page appears, then push
on the MENU SEL/ENTER dial to select the page.
Example: When you select the USER 2 EDIT page
4
Move the pointer to the item to be added (this
operation is unnecessary if no item exists on the page,
as shown in the figure for step 3) then push on the
MENU SEL/ENTER dial.
The EDIT FUNCTION screen appears.
5
Move the pointer to “INSERT” and push on the
MENU SEL/ENTER dial.
The page with the last item added appears.
6
Add the items.
1 Turn the MENU SEL/ENTER dial until the page
that has the desired items appears, then push on the
MENU SEL/ENTER dial.
2 Turn the MENU SEL/ENTER dial to move the
pointer to the desired item, then push on the MENU
SEL/ENTER dial.
The USER 2 EDIT page appears again, displaying the
newly added item.
CONTENTS E00 TOP
xx
01.EDIT PAGE
02.USER 1 EDIT
c
03.USER 2 EDIT
04.USER 3 EDIT
05.USER 4 EDIT
06.USER 5 EDIT
07.USER 6 EDIT
08.USER 7 EDIT
09.USER 8 EDIT
10.USER 9 EDIT
USER 2 EDIT E03 TOP
c
EDIT FUNCTION ESC
c
INSERT
MOVE
DELETE
BLANK
<SW STATUS> P22 ESC
FLARE :
c
ON
GAMMA : ON
BLK GAM : OFF
KNEE : ON
WHT CLIP: ON
DETAIL : ON
LVL DEP : ON
SKIN DTL: OFF
MATRIX : OFF
5600K : OFF