ARRI 16SR3 Film Camera User Manual


 
11
Installation
Shoulder Set S-3
The shoulder set S-3 has adjustable grips and an
integrated shoulder pad which allows comfortable
hand-held camera operation.
Mounting
Attach the shoulder set with the central clamp screw
into the tripod thread (3/8") on the camera base
ensuring that the index pin on the shoulder set aligns
correctly with the locating hole in the camera base.
Adjust and position the handgrips on the shoulder set
.
Connect the cable to one of the RS-sockets on
the right side of the camera
Camera Handgrip
The anatomically-shaped camera handgrip with the
RUN push button is intended for shoulder operation.
The shoulder pad can be used for more comfortable use
of the camera on the shoulder.
Mounting
By turning the intermediate ratchet mounting ring, the
angular outward position of the handgrip can be
changed to the operators personal fit.
Attach the handgrip to the right rosette mount on the
camera in the desired angle of inclination.
Connect the cable to one of the RS-sockets on
the right side of the camera.