Filter
Top Products
81
Time Code
The TC-Symbol has the following meaning:
Run
Standby
TC-Symbol off TC-Symbol blinks TC-Symbol on
TC-recording is turned off. Since the last setting of time code
or since the last synchronisation
more than 8 hours have passed.
TC-recording is turned on, no
VSU is plugged in, time code is
set or externally synchronized,
the camera is set to a TC-
compatible speed and the TC
generator is ready.
TC-recording is turned off, the
magazine is not TC-capable or
TC-sensitivity 0 is set.
There will be no TC-recording.
Possible causes:
– the camera is running
asynchronous
– magazine is not TC capable
– the recording module is
defective
– communication with the
magazine could not be
established.
Time code will be recorded.