ARRI 16SR3 Film Camera User Manual


 
Video-Assist-System
76
When using these without the video-assist-system a
100% beamsplitter is used.
The video optic can be adjusted from Normal 16 to
Super 16. The monitor displays the format filling the
monitor surface width-wise (letterbox format on Super 16).
Neither the video camera nor the video optic
should ever be used as a carrying handle, nor
should heavy pressure in any other form be
placed on it, as this could destroy it! The
accessory shoe on the video camera is for moun-
ting on the ARRIFLEX 35 III and should not be
used when mounting on the ARRIFLEX 16SR 3.
For changing format from Normal 16 to Super 16 an
intermediate ring must be used on/removed from the
video camera. See chapter 8.
Mounting the Video-Assist-System
Changing the Beamsplitter
The beamsplitter is under the carrying handle.
Loosen the 4 screws on the carrying handle
and remove the carrying handle.
hex screws
hex screws