Filter
Top Products
69
Accessories
10. Accessories
Camera Control Unit CCU-1
The camera control unit CCU-1 for the ARRIFLEX 535
and 535B can also be used on the 16SR 3. It enables
manually controlled remote control of the following
functions:
- Switching the camera on or off.
- Choosing the speed.
- Checking the set values.
- Displays and use of the film counter.
- Displays and setting TC-time (time code) and TC-user bits.
- Display of the set TC-sensitivity through the REMOTE-
menu.
Setting TC-time and TC-user bits can only be carried out
through the camera control unit or through external
synchronization.
The camera control unit is supplied with power by the
camera. If the camera is not plugged in the camera
control unit will be fed by the internal batteries. As the
battery unit limits the life of the camera control unit to
approx. 5 hours, the display illumination switches off
approx. 10 sec after last being touched when it is being
fed by batteries, and the camera control unit switches
off after approx. 5 min.
Replacing the Batteries
• Open the battery compartment with a coin.
• Pull out the battery pack.
• Use batteries as designated on the battery pack.