ARRI 16SR3 Film Camera User Manual


 
73
Accessories
To change the TC-user bits:
Depress key 2 - USERBITS is displayed against a
dark background.
Depress the ENTER key - ready for input of the new
user bits.
Enter all 8 user bits with figures 0-9 or letters A-F - the
new user bits are displayed. If input is finished with
the ENTER key, the unfilled positions will be filled with
zeros.
Depress the SEND key - the new user bits are transmit-
ted to the camera.
The OPTIONS Menu
The OPTIONS menu allows access to the LENGTH UNIT
and the COUNTER DISPLAY MODE.
The displayed points ASYNC-MODE and END WARN-
ING are intended for the ARRIFLEX 535 and have no
function on the ARRIFLEX 16SR 3.
Choose the desired point with key 2 or 4.
LENGTH-UNIT
Enables switching the film counter from meters to feet.
Choose meters with key 1 or feet with key 2 - the
desired unit of measurement is displayed against a
dark background.
Depress the SEND key - the desired unit of measure-
ment is transmitted to the camera.
COUNTER DISPLAY MODE
Enables switching the film counter between the total
exposed film and the take counter. To switch on the
camera, see chapter 9. To switch on the camera control
unit:
Choose the total exposed film counter with key 1 or
take counter with key 2 - the chosen counter is dis-
played against a dark background. Menu point 3
(remaining film display) has no function on the
ARRIFLEX 16SR 3.
Depress the SEND key - the desired counter is trans-
mitted to the camera and displayed in mode 1. If the
take counter has been chosen, the total exposed film
is displayed in mode 3, and vice versa.