Filter
Top Products
77
Video-Assist-System
• Unscrew the 4 screws SW 1,5 (key width 1,5
mm) on the beamsplitter.
• Remove the beamsplitter at the bevelled edges (under
the markings).
• Insert the desired beamsplitter and screw on with the
4 screws .
Mounting the Video Optic
• Attach the video handle without the video optic.
• Screw on with 4 screws, ensuring that the adjustment
sockets for the beamsplitter and the carrying handle
engage together.
• Attach the video optic to the video carrying handle.
• Screw tight with the knurled knob .
• Pull tight the clamp ring .
• Screw the video camera onto the C-mount thread on
the video optic.
• Loosen the clamp ring approx. 15° (as seen in
the direction of shooting, counter-clockwise).
• Turn the CCD-camera into the correct angle position
(the marking on the back of the camera must stand
upright).
• Pull tight the clamp ring.
• Screw the handles on the clamp ring into the
desired position SW 1,5.
locking lever
lock ring
focus ring
iris ring