Filter
Top Products
Magazines
18
•
•
Film Core, Core Holder and Clamp Core
A film core adapter and a collapsible core
are supplied with the camera; these are placed
on the supply and take-up film spindles.
The film is normally delivered on a core. The film core is
attaches to the core adapter on the feed side. The core
adapter is secured on the shaft with two clamp levers
which automatically unlock when it is pulled off
the shaft. On the take-up side the collapsible core is
used. It usually remains on the shaft. The collapsible
core can be pulled off easily once the lock has
been opened. When the collapsible core is placed on
the shaft it locks automatically in place.
Cleaning the Magazines
Keep the inner side of the magazine ex-
tremely clean! Clean the magazine every time
you load or unload it. Use only an optic brush!
Swing away the guide roller arm back until it
clicks - do not pull the guide roller arm upwards.
Clean the glass window for the film end sensor on the
under side of the magazine with an optic cloth and
cotton buds. If very dirty moisten the optic cloth with
pure alcohol.
retaining levers
standard
core
adapter
film spindle
supply-side
Andruckrolle
collapsable
core adapter
film spindle
take-up-side
release latch
idler roller
time code
recording unit