Filter
Top Products
94
Maintenance
Replacing the Electronic Housing
If the electronics break down the entire electronic
housing is to be exchanged. The electronic housing on
the standard camera is not the same as that on the HS
camera and should not be interchanged with it.
• Place the camera without the magazine upside down
on a soft surface.
• Unscrew the 6 screws SW 2 (key width 2 mm)
in the bottom of the camera.
• Turn the camera around again.
• Pull up the camera shaft.
• Replace the electronic housing.
• Remount the camera, taking care that the intermediate
metal plate is placed on the new electronic housing
before mounting.
hex screws