ARRI 16SR3 Film Camera User Manual


 
Power Supply
14
Charger NCL 24 R
For all 24 V batteries.
To charge the on-board batteries NC 24/1,2 the
charger-adapter cable KC 38 is required.
For use see product description NCL 24 R.
Double Charger NCL 24/1,2
To enable two on-board batteries to be charged simulta-
neously.
For use see product description NCL 24/1,2.
Mains Unit NG 12/24 R
The mains unit is suitable for use in the studio. Its use is
recommended when using electronic accessories with a
higher power consumption (e.g. eyecup-heating, Video-
Assist-System, Lens-Control-System). The mains unit has
a safety switch-off device overheating and a power
limiter.
For use see product description NG 12/24 R.
On-Board Battery NC 24/1,2
Capacity 1,2 Ah. For mobile operation.
Plug the on-board adapter into the BAT-socket and
secure it with the knurled screw.
Slide the on-board battery onto the on-board adapter
and clip onto the magazine - the magnet holder keeps
it securely in place.
Battery NC 24/7 R
Capacity 7 Ah.
For use see product description NC 24/7 R.
Connect the battery cable KC 20 or the coiled battery
cable KC 29 into the BAT-socket on the camera.
Make sure that the plug is locked in securely.
- Do not open the batteries!
- Charge batteries only with the ARRI charger!
- Do not bypass the fuse or temperature
switch! (Danger!)
- Do not heat NC-batteries!
- Do not short-circuit NC-batteries!