ARRI 16SR3 Film Camera User Manual


 
27
Camera Body
Using the manual inching mechanism adjust the mirror
shutter so that the ladjustment screw for the shutter
adjustment is visible at the bottom of the lens
mount, below the mirror shutter.
Insert the special key into the adjustment screw.
The mirror shutter can be damaged if the
special key with the protective rubber cover-
ing is not used!
By pressing, engage the adjustment screw with the
special key and hold the mirror shutter with the
manual inching mechanism in its position. While
enlarging the opening angle it is possible to support
the mirror shutter on the special key, in which case it
does not need to be held in position by the manual
inching mechanism.
Set the desired opening-angle of the mirror shutter
with the adjustment screw (to reduce the angle turn
counter-clockwise, to enlarge the angle turn clock-
wise). While adjusting the shutter angle, the shutter
can also be held with your finger in the black center,
preventing it from turning while adjusting the angle.
Be sure not to touch the mirror area of the shutter.
Checking the Mirror Shutter Setting
The setting of the mirror shutter can also be checked
with a lens in place.
In Standby, depress the PHASE pushbutton until the
wide angle symbol appears in the display. After
approx. 1 sec. the selected opening-angle will be
shown in the upper line of the display.