ARRI 16SR3 Film Camera User Manual


 
87
Maintenance
13. Maintenance
Replacing the Magazine Drive Gear
Damaged magazine drive gears must be replaced as
they cause noise.
Open the magazine on the take-up side.
Unscrew the 3 screws on the magazine gear.
Replace the gear.
Ensure that the gear has been replaced with the
arrows visible.
Screw in firmly the gear.
Cleaning the Magazine Throat
Assembly
The magazine throat assembly should be dismounted
and cleaned if
- it has become very dirty through bad film material, or
- the film runs through the magazine throat with diffi-
culty.
Dismounting
Loosen the 2 screws . The screws are very tight!
screws
screws