Filter
Top Products
Chapter 7: Troubleshooting and Support 103
The TV does
not display
images when
I connect my
camera to it.
Audio and
video cables
are switched
Try switching the audio and video
cables on the back of the TV (the
red and yellow connectors on the
cable from the camera or dock to
the TV).
The camera is
set to the wrong
TV format.
Change the TV Configuration
setting to the opposite of what it is
currently set (page 89).
TV is not set to
correct input
mode.
Check the TV user’s manual to set
the TV to accept video or input
mode.
The wrong
date and/or
time is
shown.
The date and/
or time was set
incorrectly or
the time zone
has changed.
Reset the date and time by using
the Date & Time option in the
Setup menu (page 87).
The camera
responds very
sluggishly
when trying
to review
images.
A slow memory
card or too
many images
on a card can
affect actions
like scrolling
through
images,
magnifying,
deleting, etc.
z Run the camera self-diagnostic
test (page 113) to test the speed
of your memory card.
z See the section about Storage
cards on page 137 for tips
about memory cards.
Problem Possible cause Solution