Filter
Top Products
18 HP Photosmart 945 User’s Manual
Understanding the Status Screen
When you turn on the camera, the HP logo screen and then the
status screen appear briefly on the Image Display.
The main part of the status screen
shows the number of pictures
remaining, battery level, and the
current settings for Flash, Resolution,
and Compression. Any non-default
Capture menu settings are shown as
icons across the top of the status
screen (default settings for Capture menu items do not have
icons).
The status screen also appears for a few seconds any time you
press the Flash button, Timer/Burst button, Focus button, or
open/close the pop-up flash assembly.
Choosing the Language
The first time you turn the camera on, the following screen
appears and prompts you to choose a language.
1 Scroll to the language that you
want by using the buttons
on the Controller .
2 Press the OK button to select the
highlighted language.
NOTE If you need to go back and
change the language later, you can do this in the Setup
menu. See Chapter 6: Using the Setup Menu on page 83.