Filter
Top Products
94 HP Photosmart 945 User’s Manual
Problems and Solutions
Problem Possible cause Solution
The camera
does not
turn on.
The batteries
are functioning
incorrectly, are
dead, are
installed
incorrectly, or
are missing.
z The charge in the batteries could
be low or completely drained.
Try installing new or recharged
batteries.
z Ensure that the batteries are
inserted correctly (page 16).
z Do not use ordinary alkaline
batteries. For best results, use
photo-lithium batteries or
rechargeable NiMH batteries. If
you must use alkaline batteries,
use high-grade “ultra” or
“premium” varieties.
If you are using
the HP AC
power adapter,
it is not
connected to
the camera, or
is not plugged
into a power
outlet.
Ensure that the HP AC power
adapter is connected to the
camera and is plugged into a
working electrical outlet.
The HP AC
power adapter
is not
functioning
correctly.
Ensure that the HP AC power
adapter is not damaged or
defective and is plugged into a
working electrical outlet.
The camera
has stopped
operating.
Reset the camera by removing the
batteries and then re-inserting
them (page 93).