Filter
Top Products
Chapter 7: Troubleshooting and Support 99
The camera
does not take
a picture
when I press
the Shutter
button.
You did not
press the
Shutter button
hard enough.
Press the Shutter
button all the
way down.
The memory
card is not
installed.
Install the memory card.
The memory
card is full.
Unload images from the camera
to your computer, then delete all
images on the memory card. Or
replace the card with a new one.
The memory
card is locked.
Switch the locking tab on the
memory card to the unlocked
position.
The flash is
recharging.
Wait until the flash has recharged
before taking another picture.
The camera is
set to MACRO
focus and
cannot take a
picture until it
finds focus.
z Re-focus the camera (try using
Focus Lock, page 26).
z Make sure the subject of the
picture is within the Macro
(close-up) range (page 36).
The camera is
still saving the
last picture
you took.
Wait a few seconds for the
camera to finish processing the
last image before taking another
picture.
Problem Possible cause Solution