Filter
Top Products
Chapter 6: Using the Setup Menu 89
TV Configuration
This setting allows you to set the format of the video signal for
displaying camera images on a television (TV) that is
connected to the camera with an optional Audio/Video cable
or HP 8881 camera dock.
The default setting depends on the language that you selected
when you powered on the camera for the first time.
1 In the Setup menu (page 83),
select TV Configuration.
2 In the TV Configuration sub-menu,
highlight one of these two choices:
• NTSC—Format used primarily
in North America and Japan
• PAL—Format used primarily in
Europe
3 Press OK to save the setting and return to the Setup menu.
For more information on connecting the camera to a TV, see
either Displaying Images on a TV on page 81 when using the
optional Audio/Video cable, or Displaying Images on a TV
Using the Dock on page 134 when using the HP 8881 camera
dock.