Filter
Top Products
Chapter 6: Using the Setup Menu 85
Focus Assist Light
Sometimes in low-light situations, the camera will use the red
focus assist light on the front of the camera to aid in focusing.
This setting allows you to turn off this light (for example when
you do not want the focus assist light to distract the subject of
your picture).
1 In the Setup menu (page 83),
select Focus Assist.
2 In the Focus Assist sub-menu,
highlight Auto or Off.
3 Press OK to save the setting and
return to the Setup menu.
NOTE HP recommends leaving this
setting at Auto, since turning it off hinders the ability of the
camera to focus correctly in low light.
LCD Brightness
This setting lets you adjust the brightness of the Image Display.
By default, the Image Display is optimized for indoor use. You
can use this setting to increase the brightness and contrast for
better outdoor viewing.
NOTE If you use the Outdoor setting, the image may appear
overexposed when viewing it on the camera indoors.
1 In the Setup menu (page 83),
select LCD Brightness.
2 In the LCD Brightness sub-menu,
select Indoor or Outdoor.
3 Press OK to save the setting and
return to the Setup menu.