Filter
Top Products
34 HP Photosmart 945 User’s Manual
Using Self-Timer Mode
1 Secure the camera to a tripod or set it
on a stable surface.
2 Press the Timer/Burst (
) button until
SELF-TIMER or SELF-TIMER—2 SHOTS
appears in the active display.
3 Frame the subject in the active display.
4 The next steps depend on what you
are capturing:
Still
picture
1 Press the Shutter button halfway down for Focus Lock
(camera measures, then locks the focus and exposure).
The camera will hold these settings until it takes the
picture.
2 Press the Shutter button all the way down. A 10-
second countdown appears on the active display and
the Self-Timer light on the front of the camera blinks for
10 seconds before the camera takes the picture. If you
set SELF-TIMER—2 SHOTS, the Self-Timer light blinks for
a few more seconds until the second picture is taken.
NOTE If you immediately press the Shutter button all
the way down without using Focus Lock, the camera
will lock focus and exposure just before the end of the
10-second countdown. This is useful when one or
more subjects will be entering the picture during the
10-second countdown period.
You cannot record audio when using the Self-Timer, but
you can add an audio clip later (see page 64).
Video
clip
1 Rotate the Mode selector to Video mode.
2 To start recording, press the Shutter button and then
release it. A 10-second countdown appears in the
active display, and then the video will start recording.
3 To stop recording the video clip, press the Shutter
button again. or let it time out by itself (see page 29)
MF