Kodak 100 PLUS Photo Scanner User Manual


 
4-8 A-61588 July 2008
The Advanced option provides access to two additional options:
Interactively Name Scanned Files and Add Date/Time Stamp.
Interactively Name Scanned Files — selecting this option will
require the user to enter a file name for each destination selected
during a scan job. This option should be used with caution as it will
require an extra step each time a document is scanned.
Add Date/Time Stamp — by default, Date and Time Stamps are
appended to each file name the Scan Station creates. If the user
wants, they can turn this option off. When turning this option off, only
the file name prefix and the appropriate file name extension will be
used to create the file name.
For more information, see the section entitled, “File Name settings” in
Chapter 5, Scan Station Administration Specifics.
Input Document Is If your organization typically scans one-sided documents, select One
Sided as the default. If Two Sided is selected, the Scan Station will
simultaneously scan the front and back of a document in a single pass.
•NOTES:
This setting can be changed by a walk-up user for a single scan
session if required. The setting will be changed back to the default at
the end of the scan session.
The two-sided option can be used in conjunction with blank page
detection for better performance. See the section entitled,
“Advanced options” later in this chapter to enable blank page
detection.