Filter
Top Products
A-61588 July 2008 6-1
6 Maintenance
This chapter provides cleaning and replacement procedures for the
Kodak Scan Station 100.
Cleaning procedures Your Scan Station needs to be cleaned periodically. If your documents
do not feed easily, if several documents feed at the same time or if
streaks appear on your images, it is time to clean your Scan Station.
The section entitled, “Supplies and consumables” at the end of this
chapter provides a listing of the supplies required to clean your Scan
Station.
IMPORTANT: Use only non-flammable cleaners such as those provided
through Kodak Parts Services. Do not use household
cleaners.
Do not use cleaners in confined areas, use with adequate
ventilation.
Do not use cleaners on hot surfaces. Allow surfaces to
cool to ambient temperature before use.
Opening the cover 1. Open the cover by pressing the release lever.
2. When finished with the cleaning procedures, close the Scan Station
cover.