Filter
Top Products
A-61588 July 2008 3-9
3. Select IP Address to configure the device’s network address.
Select one of the following:
• If your network uses dynamic IP addresses, click Automatic
(DHCP), and proceed to the next section, “E-mail settings”.
• If your network uses static IP addresses, click Static (IPv4) and
continue with Step 3.
• If all the static IP Address options are not displayed, use the up
and down arrows.
• All of the options on the Static IP Address screen will display a
keyboard/keypad for entering information. When finished making
an entry in the following fields, click Done on the keyboard/
keypad to accept the values and close the screen.
- Click IP Address and enter the address.
- Click Subnet Mask and enter the mask.
- Click Default Gateway and enter the gateway address.
- Click Preferred DNS Server and enter the server address.
- Click Alternate DNS Server and enter the server address.
- Click Preferred WINS Server and enter the server address.
- Click Alternate WINS Server and enter the server address.
NOTE: Configuring the DNS and WINS servers may not be
required.