Lexmark 20E Photo Printer User Manual


 
b Enter the details about your wireless network.
Note: Your WEP, WPA, or WPA2 key may be obtained from the bottom of the box, the documentation that
came with the box, or from the box Web page. If you have already changed the key for your wireless
network, then use the key you created.
4
Follow the instructions on the computer screen to complete the installation.
Assigning a static IP address
The printer is automatically assigned an IP address through DHCP on most networks.
1 Complete the wireless or Ethernet setup, allowing the printer to receive a DHCP address from a DHCP server on
the network.
2
Print a network setup page to see the IP address currently assigned to the printer.
3
Open a Web browser, and then type the printer IP address in the address field. Press Enter.
Note: If you are using a proxy server, then temporarily disable it to load the Embedded Web Server correctly.
4 Click Settings > Network/Ports > TCP/IP > Set static IP address.
5 In the Address field, type the IP address you want to assign to the printer, and then click Submit.
To verify, type the static IP address in the Web browser address field, and then press Enter.
For more information, contact your system support person.
Changing wireless settings after installation
To change the wireless settings on the printer, such as the configured network and the security key, do the following:
For Windows users
1
Click or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3
Select your printer, and then navigate to:
Printer Home > Settings > Wireless setup utility
4 Follow the instructions on the computer screen.
For Macintosh users
1 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.
2 Doubleclick Wireless Setup Assistant.
3 Follow the instructions on the computer screen.
Networking 105