Lexmark 20E Photo Printer User Manual


 
Use the To
14 Power supply with port Connect the printer to the power cord.
15 Duplex unit
Print on both sides of a sheet of paper.
Access paper jams.
16 USB port Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable or installation cable.
Note: Remove the sticker to access the port.
17 Ethernet port Connect your printer to a computer, a local network, an external DSL, or a cable modem.
18 LINE port Connect the printer to an active telephone line through a standard wall jack (RJ11), DSL
filter, or VoIP adapter, or any other adapter that allows you to access the phone line to send
and receive faxes.
19 EXT port Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer and if
this connection method is supported in your country or region.
Note: Remove the plug to access the port.
Selecting a location for the printer
When selecting a location for the printer, leave enough room to open trays (including optional trays), covers, and doors,
depending on the features of your printer. It is important to:
Provide a flat, sturdy, and stable surface.
Keep the printer:
Away from the direct airflow of air conditioners, heaters, or ventilators
Free from direct sunlight, humidity extremes, or temperature fluctuations
Clean, dry, and free of dust
About your printer 12