Filter
Top Products
Inserting a memory card Inserting a flash drive
Notes:
•
Insert the card with the brand name label facing up.
• Make sure any arrows on the card point toward the printer.
• If necessary, connect the memory card to the adapter that came
with it.
• Make sure that the memory card inserted is supported by the
printer. For more information, see “Supported memory cards
and file types” on page 46.
•
The card reader light comes on when a memory card is inserted
and blinks when a memory card is being accessed.
Notes:
•
The flash drive uses the same port that is used
for a PictBridge camera cable.
• An adapter may be necessary if your flash
drive does not fit directly into the port.
Warning—Potential Damage:
Do not touch any cables, any network adapter, any
connector, the memory device, or the printer in the areas shown while actively
printing, reading, or writing from the memory device. A loss of data can occur.
The Memory Device screen appears on the display.
Notes:
• If the printer does not recognize the memory device, then remove and reinsert it.
•
If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a memory card is
in the card slot, then the display prompts you to choose which memory device to use.
Printing 45